ProxyVolt’s PRESET system has no visible gain controls eliminating operator adjustment. Gain adjustment is still possible through authorised client personnel. Suitable for single voltage work environments.
FEATURES
- 4 safeguard circuits for antenna, system, power & speaker.
- Concealed dual potentiometers for adjustment of sensitivity (coarse and fine).
- High / Low gain switch (illuminated on high power).
- LED indication for proximity alarm, power, alarm mute and multiple safeguards.
- Multiple audible alarms for proximity alarm and safeguard circuits.
- Auxiliary alarm output to control external devices.
- Auxiliary input to control audible alarm state (alarm mute option).
- Circuit breakers for power, 12V out and alarm out.
- Detection of AC power of any high voltage line (240V or greater).
- 12 or 24V operation.
SPECIFICATIONS
| Power | 12 Volt / 24 Volt DC |
|---|---|
| Voltage Detection | 240 Volt Upwards |
| Frequency | 50Hz (Australian Version) 50Hz (European Version) 60Hz (North American Version) |
| Current Draw | Normal Operation 200mA Alarm Mode 350mA |
| Circuit Breakers | Circuit Breaker 1 – 2 Amp Circuit Breaker 2 – 2 Amp Circuit Breaker 3 – 2 Amp |
| Alarms | Proximity Alarm – continuous alarm with LED Antenna Safeguard – intermittent alarm with LED Receiver Safeguard – intermittent alarm with LED System Safeguard – intermittent alarm with LED |
| Inputs/Outputs | Pin 1 – Body Up / Alarm Mute Input Pin 2 – Body Up Alarm Output Pin 3 – Antenna Safeguard LED Pin 4 – System Safeguard LED Pin 5 – Inclinometer Input Pin 6 – Alarm Output Pin 7 – 12 Volt Output Pin 8 – Variable Inclinometer Input Pin 9 – Speaker / Power Safeguard Output Pin 10 – Reset Switch / Ignition Sense Pin 11 – Alarm Mute LED Ouput Pin 12 – Ground |
| Sensitivity Adjustment | Coarse & Fine Gain Potentiometers |
PACKAGED WITH
- Receiver
- Standard Mounting Bracket
- Side Screws
- Power Lead
- External Speaker
*Antenna is not included with receiver. Please refer to Antenna page.